Nuie Slate Grey Screw-Fit Straight Shower Tray Leg & Plinth Kit

The Nuie grey slate shower tray leg and plinth kit raises a compatible tray to provide space for the waste and pipework. Its straight plinth conceals the supports beneath the tray and can be trimmed to suit the installation.

The legs are screwed to a plywood baseboard using the supplied fixings. Nuie requires an 18mm minimum plywood baseboard and wall battens; these must be supplied separately. Dry-fit the tray waste and pipework to check clearance before securing the tray.

Pack Includes

Legs, matching plinth panel(s), clips and screws for the selected kit. Shower tray, waste, pipework, plywood baseboard, battens and bedding materials are not included.

Features & Benefits:

• Grey Slate finish
• Screw-fixed leg fitting to the required plywood baseboard
• ABS plinth panel(s)
• Plinth panels are approximately 105mm high; refer to the selected kit drawing
• Panel(s) can be trimmed to the tray contour
• Waste and installation support materials sold separately
• 1 year manufacturer's guarantee

Choosing Your Kit

These kits are intended for compatible Nuie shower trays with the matching profile and plinth contour. Check leg support as well as panel size. Nuie’s fitting guide requires two packs of six legs for trays 1300mm and above. Follow the layout for your tray and supply any additional support required; do not assume a panel size match alone confirms suitability. The curved panels must match the tray curve and handed installation. Colour-matched suitability has not been confirmed for the black slate or square-waste tray ranges.