Multipanel White Gypsum Bathroom Wall Panels

Multipanel White Gypsum bathroom wall panels combine pale shades with a mineral plaster effect. The light, concrete-inspired design brings texture and interest to bathroom walls while remaining soft enough for a complete room scheme.

Pair White Gypsum with pale wood for a relaxed finish, or use black fittings to give the room more definition. Plain and large tile styles let you choose between a continuous surface and a more structured tiled appearance, without introducing conventional grout joints.

What you receive: One Multipanel bathroom wall panel in the style, panel size and edge finish selected. A quantity of 1 is one panel. Trims, adhesive and sealant are sold separately.

Hydrolock or unlipped: which edge should you choose?

Hydrolock T&G: Machined tongue-and-groove edges lock adjoining panels together for an almost seamless joint without a separate mid-joint profile. The joints still require the specified silicone sealant; clicking panels together alone does not make the installation watertight. Allow for the reduced finished face width when measuring your walls.

Unlipped: Straight, square-cut edges without the Hydrolock tongue-and-groove connection. Use the appropriate joining profiles and sealing details specified by Multipanel. Choose your edge finish to suit the planned installation rather than assuming both options fit together in the same way.

Choosing your White Gypsum panel style

Plain: The decorative surface has no etched tile layout. This describes the pattern, while Hydrolock or unlipped describes the edge connection. A plain marble or stone-effect panel still retains its decorative veining or texture.

Large Tile: Etched decorative lines divide the surface into rectangular tile-effect sections measuring 580mm x 400mm, with 2.5mm pale grey grout-effect lines. These are lines within a wall panel, not separate tiles or conventional cement grout joints.

The tile-effect options listed here use Hydrolock edges. Unlipped options apply to the Plain style. Panel sizes and available combinations vary by style, so check the complete variant selection before ordering. Each selected item is one panel; trims, adhesive and sealant are supplied separately.

Use the finished face coverage and allow for cuts when calculating quantities. Follow Multipanel’s current fitting instructions for preparation, joint sealing and finishing around trays, baths and fittings. Maintain the decorative surface with warm water and a mild, non-abrasive detergent. The 30-year manufacturer warranty is subject to its terms and fitting and maintenance requirements.

Available panel options and manufacturer SKUs

The table shows the combinations listed for this decor. Dimensions are height x nominal width x thickness. Choose the complete matching combination in the options above.

Hydrolock finished face width: Allow 18mm less than the nominal panel width for the Hydrolock joint: 598mm nominal = 580mm finished face; 1200mm nominal = 1182mm finished face. Use the finished face size when calculating coverage, with additional allowance for cuts.

Please note - Must be installed in accordance with manufacturers instructions, failure to do so will invalidate any warranty.

Features & Benefits:

• Pale mineral plaster effect adds texture without a heavy colour contrast
• Suitable for bathroom walls and shower enclosures when correctly installed and sealed
• Decorative laminate surface is easy to wipe clean
• Grout-free panel surface reduces routine cleaning
• Hydrolock or straight-edged options are clearly identified in the variant selector
• Made in Britain using FSC-certified materials
• Supported by Multipanel's conditional 30-year manufacturer warranty